• DESCRIPTION

About 304 stainless steel decorative pipe

304 stainless steel decorative pipe & tube is the most common in life, the most frequent use of the material. Becauseof the production process is simple, high efficiency, short production cycle, so get the majority of customers.

304 as the pipe for conveying fluid, such as oil, gas, water, gas, steam, in addition, the bending and torsional strength of the same, the weight is light, so it is widely used in the manufacture of machinery parts and engineering structures.And 304 of the decoration is very strong, widely used in building decoration, housing decoration and public property chang.



Chemical composition and Physical property


Grade C(%) Si(%) Mn(%) Cr(%) P(%) S(%) N%) Ni(%) Cu(%)
304 ≤0.08 ≤1.00 2.00 18.00-20.00 ≤0.045 ≤0.03 ≤0.10 8--11 ---


Grade TS(Mpa) YS(Mpa) EL(Mpa)
304 ≥520 ≥205 ≥40

Allowed wall thickness tolerance

Level Wall tolerance allowed
D1 +-1.5%,Min +-0.75mm
D2 +-1.0%,Min +-0.50mm
D3 +-0.75%,Min +-0.30mm
D4 +-0.50%,Min +-0.10mm


Calculating formula for weight(KG/M)

(Outdais meter-wall thickness)×wall thickness}×0.02491=KG/M


Application

304 stainless steel decoration pipe was widely used in stainless steel anti-theft window, stainless steel railings, stainless steel stair railing, interior design, etc.


Finish processing

We can process the finish according to the customer's requirements.We have our processing machine,we can process No.4 / HL / Mirror finsih for decoration pipe based on the original finish(bright finsih)after produced from factory.


Production process of SS decoration round pipe &Tube

We have our own processing factory, production machines, skilled workers. Short production cycle, high efficiency, high product quality.Division,our company have 201,304,316L and other conventional goods,delivery time is short.For the majority of customers is a good choice.Also,we can process No.4,HL,Mirror finish etc by our machine according to customers requirements.
  • Prepare the original material: stainless steel sheet/strip
  • Slit the original material: stainless steel sheet/strip
  • Use the machine to rolled into tube type
  • Then fused by rolled machine
  • Finish treatment:Bright heat treatment
  • Both inside and outside the weld process
  • The shape of the pipe
  • Important processing:Fixed outside diameter
  • eddy current testing
  • Laser diameter measurement
  • Pickling process
  • Finished: Storage
Feedback form contact with us
Product Catalog